Photos: Glass Tubing with Coolant

Before we wrap up this review let’s take a look at some shots of the glass tube with Distilled and some Mayhems dyes.

Notice the light refraction from the LED strip set up behind the blue manifold.  I believe in a system with LED lighting some awesome reflections and refractions are going to take place giving a showcase look to the build.

Ocean Blue:

Coolant-3

Yellow:

Coolant-1

Purple:

Coolant-2

UV Pink:

Coolant-4

UV Green:

Coolant-5

Blood Red:

Coolant-6

Oil Black:

Coolant-7After the Oil Black photo was taken I turned off 2 of the 3 studio lights and faced the remaining light at the ceiling. This gem of a photo really shows off the glass tube doing it’s thing bending and shaping the light:

Coolant-8Then I turned off the remaining studio light:Coolant-9

Next up – Summary!

RELATED ARTICLESMORE FROM AUTHOR

4 COMMENTS

  2. Well, after reading and watching the Dremel Jig Setup vid, I thought of a few things…

    1) I see no difference in using glass over PETG or Acrylic.
    2) PETG or Acrylic is much cheaper and EASIER to cut than glass. (Even if it wasn’t cheaper, it’s glass is STILL much harder to cut)
    3) Bending PETG or Acrylic (obviously) is much easier than trying to bend glass (and that’s if you have the $$$ to buy one and the skills to bend glass using a kiln). PETG or Acrylic is very easy by comparison.
    4) As you can see glass tubing is easily subject to chipping and cracking if it’s not cut right (over PETG or Acrylic)
    5) If you decide to use Glass instead of PETG or Acrylic, you’re going to have to spend $$$ getting a Dremel Jig Setup going. I have the Dremel 4000 and that unit (kit) cost me $98.00 at the time and although it’s a great unit to use for someone doing a one time build (or even continual builds), it’s still way too much $$$ over simply using a hand saw to cut your PETG or Acrylic tubing. Then you have to set up and build that Dremel Jig Setup. That’s too much time to make happen.
    6) In some of the pics, even the reviewer/writer stated that he saw that the Acrylic tubing was even cleaner (at certain angles) to peer through than glass tubing, so right there, what real difference does it make to choose glass tubing over Acrylic (or even PETG for that matter)? – NONE!

    Thank you for this review, but you should have entitled this:

    “Mayhems Glass Tube Review… You Gotta Be On Crack!!!”

    I already knew that I would have to face this expensive and arduous process, when all you have to do is use a basic PETG/Acrylic bender kit, that uses a heat gun and hand saw. It’s much easier to use those items than buying and building a Dremel Jig Setup (which would take hours). Then purchasing and having the skill set to learn how to use a Kiln?!?! Yeah, right!!! I know that I’m not going to waste my time with all of that. Thank you for proving this point with your detailed review (as I already knew this). I’m sticking with PETG to showcase my build(s). Later… 🙂

  3. Very cool article (pun intended).

    FYI, borosilicate glass does not contain crystalline silica which is what causes silicosis. It is amorphous. No problem with being safe though.

Comments are closed.