DSC_1216Well it certainly looks like it did on the box!  In addition to green this case also comes in red and blue.
DSC_1217The left panel features a large embossed In Win logo.  The side panel is secured with the 4 silver hex nuts.
DSC_1218In Win is also represented on one of the outer dark grey panels in the middle:
DSC_1219Let’s take a look at the front IO panel:
DSC_1220Power, reset, 2 USB3, headphone, mic and a HDD LED.

DSC_1221Mesh is used to hide and protect the hardware on the top.  There are however still quite large openings to drop things into.  The dark grey panels are held together with the silver bars.  This is a nice clean modern look.  However each dark grey panel is not very thick and is unsupported in between the corner bars so they do flex quite easily if you put any pressure on them.
DSC_1222It’s hard to see but they are also not all the same dimensions.  This gives a more interesting modern look that works well.

DSC_1223Again the back is quite open.  The power supply connector is at the top of the rear, however this is merely an extension as the PSU itself is mounted in the front of the case.

DSC_1224

To the right of the IO port is where the hard drives and ODD will mount.  You can also make out the boxy shape of the PSU mounted to left of the IO port:

DSC_1225

A final look at the design details to the panels:

DSC_1232

Now let’s open it up!