Flow Rate Testing

If you don’t know how to read a pressure/flow plot then check out our guide.  Testing was done by hooking up the block under test to a water faucet/tap and varying flow through it.  Flow was measured using a 5GPM King Instruments Rotameter, and pressure across the block was measured using a Dwyer differential manometer.  A Koolance CPU-380 block is also used here as a reference point:

980restriction

It can be seen that all but two of the blocks have similarly low restriction.  Aqua Computer’s Kryographics is smack bang in the middle of the “good performing group” and so restriction is very acceptable.

Onwards to thermal performance!

RELATED ARTICLESMORE FROM AUTHOR

4 COMMENTS

  3. Do you know if the 980Ti version would have a compatibility issue with the Asus X99 Deluxe. I really want to wait for watercool to release their acrylic heatkiller version, buy there is release in site.

  4. […] Forum soll es jetzt schon lieferbar sein, aber steht nach wie vor die ewig langen Lieferzeiten. AquaComputer Kryographics for GTX 980 Review – AquaComputer's GTX 980 Water Block & Active Backp… R9-290x GPU Waterblock Roundup! – ExtremeRigs.net Wegen dem Liefertermin Shoggy per PM […]

Comments are closed.